Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.

Hard Temper
Specifications:
CDA 260 ASTM B19, B36
UNS C26000
Nominal Composition:
Copper: 70% Zinc: 30%

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.

Soft, 1/4 Hard, Half Hard
8' and 10' Mill Lengths
Specifications:
CDA260 AMS 4505, 4507 ASTMB19, B36
UNS C26000
Nominal Composition:
Copper 70% Zinc 30%

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.

Spring Temper
Coil and Sheet
Specifications:
CDA260 AMS 4505, 4507 ASTMB19, B36 UNS C26000
Nominal Composition:
Copper: 70% Zinc 30%

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Phosphor Bronzes - Excellent for spring contacts, for electronic and mechanical devices, diaphragms, instruments. Good fatigue and wear resistance.

Spring Temper
8' Mill Lengths
Specifications:
CDA 510 AMS4510 ASTM B103 UNS C51000
Nominal Composition:
Copper 95% Tin 5% Phosphorus 0.03 - 0.35%

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.
Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.

Half and Full Hard
Coil and 8' Mill Length
Specification:
CDA 353 UNSC35300 ASTM B121
Nominal Composition:
Copper 65% Zinc 33% Lead 2%

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.

Cold Rolled
Specifications:
CDA 280 ASTM B36
UNS - C28000
Nominal Composition:
Copper 60% Zinc 40%

Cartridge Brass, 70% - For small arms, shell cases; deep drawn and spun parts; eyelet machine products.

Soft, 1/4 Hard, Half Hard
8' Mill Lengths
Specifications:
CDA 260 AMS 4505, 4507 ASTM B19, B36
UNS C26000
Nominal Composition:
Copper 70% Zinc 30%

Leaded Brasses - Flat, stiff, free-cutting brass for blanking; clock, watch, and instrument frames; wheels and so on. Also used for engraving purposes.

Clock Brass
Half Hard
8'-10' Mill Lengths
Specifications:
CDA 353 ASTM B121 UNS C35300
Nominal Composition:
Copper 65% Zinc 33% Load 2%

Cold Rolled to 3/8 Inch Thick
Hot Rolled From 1/2 to 3 Inch Thick
Specifications:
CDA 280 ASTM B36
UNS C28000
Nominal Composition:
Copper 60% Zinc 40%

Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.

Standard Lengths: 144" and 72"

Specifications:CDA 954 UNS 95400

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.

Electrolytic Tough Pitch
Specifications:
CDA 110 ASTM B152
AMS 4500
UNS C11000
Nominal Composition:
Copper: 99.9%

Made in a variety of widths, gauges and tempers - for stamping, deep drawing, forming, spinning and spring applications. Precise control of grain structure means economy in fabrication, with excellent finish and quality.

Annealed, Quarter Hard, Half Hard
8' Mill Lengths and Coil
Electrolytic Tough Pitch
Specifications:
CDA 110 ASTM B152
AMS 4500
UNS C11000
Nominal Composition:
Copper: 99.9%

Specifications:
CDA 110 ASTM B152
AMS 4500
UNS C11000
Nominal Composition:
Copper: 99.9%
48" and Half Hard is available by request.