Continental Steel & Tube Co.
P.O. Box 030040
Fort Lauderdale, FL 33303-0040
Phone: 954-332-2290
Fax: 954-332-2296
Toll-free: 877-761-3491
Email: sales@continentalsteel.com
Website: http://www.continentalsteel.com
All Categories > Stainless Steel > Stainless Steel Plate > Stainless Steel Plate - Type 410S > Item # 410S-2500-48-120  


Item # 410S-2500-48-120, Stainless Steel Plate - Type 410S

Hot Rolled, Annealed and Pickled
A.S.T.M. A240/A480 ASME SA-240





Specifications  · Typical Mechanical Properties  · Comparative Characteristics and Applications  · Applications

Specifications

Material
Type 410S Stainless Steel

Shapeform
Plates

Thickness
1/4 inches

Thickness
0.25 inches

Size
48 x 120 inches

Width
48 inches

Length
120 inches

Weight per Plate
446 lbs

Finish
No. 2B

Condition
Hot Rolled Annealed
Pickled

Nominal Composition
0 or trace Nickel
0.06 to 0.35% Carbon
0.75% Max. Titanium x Carbon Min
1.00% Max. Manganese
1.00% Max. Silicon
10.50 to 11.75% Chrominum

ASTM Specification
ASME SA-240
ASTM A240
ASTM A480
UNS S41008


Typical Mechanical Properties

Steel Alloy Group

 View
Ferritic

Magnetic Properties
Magnetic

Harden By
Cold Work

Corrosion Resistance
Med. to High

Hardness
Low

Strength
Low

Ductility
Med.

Toughness
Low to Med.

Elec. Conductance
Med.

Thermal Conductance
Med.

Thermal Expansion
Med.

Heat Resistance (Scaling Strength)
High/Low


Comparative Characteristics and Applications

Yield Strength
49000 lbs/in²

Tensile Strength
70000 lbs/in²

Elongation percent in 2 inches
31 %

Hardness (Rockwell B)
85

Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F
9000 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F
4200 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F
4000 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F
1000 lbs/in²

Density
0.28 lbs/in³

Modulus of Elasticity in Tension
29.0 x 106 lbs/in²

Specific Heat (32 to 212°F)
0.11 BTU/ºF/lbs

Thermal Conductivity at 212°F
14.4 BTU/hr.ft²/ft/ºF

Thermal Conductivity at 932°F
16.6 BTU/hr.ft²/ft/ºF

Mean Coefficient of Thermal Expansion per °F (32 to 212°F)
9.3 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 600°F)
9.5 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1000°F)
10.3 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1200°F)
10.7 x 10-6 ºF

Melting Point Range
2700 to 2750 ºF

Electrical Resistivity
57 µΩ.cm

Max. Operating Temp. (Continuous Service)
1250 ºF

Max. Operating Temp. (Intermittent Service)
1400 ºF

Welding Properties
Fair-Preheat 400-500°F, Anneal 1250°F after welding

Drawing and Stamping
Fair-Good

Hot Working - Initial Forging
2000 to 2200 ºF

Annealing Temp.
1500 to 1650 ºF


Applications
  • Rapid transit cars, buses, aircraft, cargo containers
  • Retractor springs
  • Hose clamps
  • Conveyors
  • Bottling machinery
  • Jewelry
  • Cryogenic vessels and components
  • Still tubes
  • Expand metal parts
  • Mixing bowls
  • Dryers
  • Furnace parts
  • Heat exchangers
  • Paper mill equipment
  • Oil refining equipment
  • Textile industry
  • Dyeing equipment
  • Jet engine parts
  • Welded storage tanks for organic chemicals
  • Combustion chambers
  • Furnace arch supports
  • Kiln linings
  • Smoke control ductwork
  • Coal chutes
  • Gauge parts
  • Cutlery
  • Fish hooks
  • Glass molds
  • Bank vaults
  • Fasteners
  • Skewers
  • Dairy industry
  • Burner and emission control components
  • Recuperators
  • Pipes, tubes





Print Back