Continental Steel & Tube Co.
P.O. Box 030040
Fort Lauderdale, FL 33303-0040
Phone: 954-332-2290
Fax: 954-332-2296
Toll-free: 877-761-3491
Email: sales@continentalsteel.com
Website: http://www.continentalsteel.com
All Categories > Stainless Steel > Stainless Steel Plate and Coil > Stainless Steel Plate and Coil - Type 304L > Item # 304L-1875-36-120  


Item # 304L-1875-36-120, Stainless Steel Plate and Coil - Type 304L

Hot Rolled, Annealed and Pickled
Non-Magnetic (May be slightly magnetic when cold-worked.)
A.S.T.M. A240/A480 A.S.T.M. A262 Prac E
ASME SA-240
Coils also may be custom leveled to your exact sizes.
Finish: Plates are available in #1 H.R.A.P.. 2B, #3, #4. Contact our sales department for sizes not shown.





Specifications  · Typical Mechanical Properties  · Comparative Characteristics and Applications  · Applications

Specifications

Material
Type 304L Stainless Steel

Shapeform
Plates

Thickness
3/16 inches

Thickness
0.1875 inches

Size
36 x 120

Width
36

Length
120

Weight per Plate
257 lbs

Finish
No. 2D

Condition
Hot Rolled Annealed
Pickled

Nominal Composition
0 to 0.25% Carbon
1.00% Max. Silicon
2.00% Max. Manganese
6 to 36% Nickel
7 to 30% Chrome

ASTM Specification
ASTM A240
ASTM A262 Prac E
ASTM A480
ASTM SA-240
UNS S30403


Typical Mechanical Properties

Steel Alloy Group

 View
Austenitic

Magnetic Properties
Non-Magnetic

Harden By
Cold Work

Corrosion Resistance
High

Hardness
Low to Med.

Strength
Low to Med.

Ductility
High

Toughness
High

Elec. Conductance
Low

Thermal Conductance
Low

Thermal Expansion
High

Heat Resistance (Scaling Strength)
High/High


Comparative Characteristics and Applications

Yield Strength
39000 lbs/in²

Tensile Strength
87000 lbs/in²

Elongation percent in 2 inches
56 %

Hardness (Rockwell B)
82

Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F
17000 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F
12000 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F
7000 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F
4000 lbs/in²

Density
0.29 lbs/in³

Modulus of Elasticity in Tension
28.0 x 106 lbs/in²

Specific Heat (32 to 212°F)
0.12 BTU/ºF/lbs

Thermal Conductivity at 212°F
9.4 BTU/hr.ft²/ft/ºF

Thermal Conductivity at 932°F
12.4 BTU/hr.ft²/ft/ºF

Mean Coefficient of Thermal Expansion per °F (32 to 212°F)
9.6 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 600°F)
9.9 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1000°F)
10.2 x 10-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1200°F)
10.4 x 10-6 ºF

Melting Point Range
2550 to 2650 ºF

Electrical Resistivity
72 µΩ.cm

Max. Operating Temp. (Continuous Service)
1650 ºF

Max. Operating Temp. (Intermittent Service)
1500 ºF

Welding Properties
Excellent

Drawing and Stamping
Good

Hot Working - Initial Forging
2100 to 2300 ºF

Annealing Temp.
1850 to 2050 ºF

Stress Relieving Temp.
400 to 750 ºF


Applications
  • Rapid transit cars, buses, aircraft, cargo containers
  • Retractor springs
  • Hose clamps
  • Conveyors
  • Bottling machinery
  • Jewelry
  • Cryogenic vessels and components
  • Still tubes
  • Expand metal parts
  • Mixing bowls
  • Dryers
  • Furnace parts
  • Heat exchangers
  • Paper mill equipment
  • Oil refining equipment
  • Textile industry
  • Dyeing equipment
  • Jet engine parts
  • Welded storage tanks for organic chemicals
  • Combustion chambers
  • Furnace arch supports
  • Kiln linings
  • Smoke control ductwork
  • Coal chutes
  • Gauge parts
  • Cutlery
  • Fish hooks
  • Glass molds
  • Bank vaults
  • Fasteners
  • Skewers
  • Dairy industry
  • Burner and emission control components
  • Recuperators
  • Pipes, tubes





Print Back