Print Back
Welded and Seamless Cold Drawn, Annealed and Pickled
20' Random Lengths
Specifications:
Seamless Tube ASTM A269 and A213.
Welded Tube ASTM A269 and A249.
Hollow Bar AMS 5639 (304 only) and ASTM A511
Stainless Steel Tubing
Unit of Measure
Items Stainless Steel Tubing
304-0625-010S
Seamless Stainless Steel Tube - Type 304
Stainless Steel Tubing
304-0625-016S
Seamless Stainless Steel Tube - Type 304
Stainless Steel Tubing
304-0625-020S
Seamless Stainless Steel Tube - Type 304
Stainless Steel Tubing
304-125-012S
Seamless Stainless Steel Tube - Type 304
Stainless Steel Tubing
304-125-016S
Seamless Stainless Steel Tube - Type 304
Material N/A Type 304 Stainless Steel
Shapeform N/A Seamless Tube
O.D. N/A 1/16 inches N/A 1/16 inches N/A 1/16 inches N/A 1/8 inches N/A 1/8 inches
O.D. N/A 1/16 inches1.5875 mm N/A 1/16 inches1.5875 mm N/A 1/16 inches1.5875 mm N/A 1/8 inches3.175 mm N/A 1/8 inches3.175 mm
Wall Thickness N/A 0.01 inches0.254 mm N/A 0.016 inches0.4064 mm N/A 0.02 inches0.508 mm N/A 0.012 inches0.3048 mm N/A 0.016 inches0.4064 mm
Nominal I.D. N/A 0.042 inches1.0668 mm N/A 0.030 inches0.762 mm N/A 0.022 inches0.5588 mm N/A 0.101 inches2.5654 mm N/A 0.093 inches2.3622 mm
Weight N/A 0.0056 lbs/ft0.0083337184 kg/m N/A 0.0079 lbs/ft0.0117564956 kg/m N/A 0.0091 lbs/ft0.0135422924 kg/m N/A 0.0145 lbs/ft0.021578378 kg/m N/A 0.0186 lbs/ft0.0276798504 kg/m
Nominal Composition N/A 0 to 0.25% Carbon 1.00% Max. Silicon 2.00% Max. Manganese 6 to 36% Nickel 7 to 30% Chrome
ASTM Specification N/A ASTM A213 ASTM A269 UNS S30400
Random Length N/A 20 ft
Steel Alloy Group N/A Austenitic
Magnetic Properties N/A Non-Magnetic
Harden By N/A Cold Work
Corrosion Resistance N/A High
Hardness N/A Low to Med.
Strength N/A Low to Med.
Ductility N/A High
Toughness N/A High
Elec. Conductance N/A Low
Thermal Conductance N/A Low
Thermal Expansion N/A High
Heat Resistance (Scaling Strength) N/A High/High
Yield Strength N/A 46000 lbs/in²
Tensile Strength N/A 89000 lbs/in²
Elongation percent in 2 inches N/A 55 %
Hardness (Rockwell B) N/A 86
Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F N/A 17000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F N/A 12000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F N/A 7000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F N/A 4000 lbs/in²
Density N/A 0.29 lbs/in³
Modulus of Elasticity in Tension N/A 28.0 x 106 lbs/in²
Specific Heat (32 to 212°F) N/A 0.12 BTU/ºF/lbs
Thermal Conductivity at 212°F N/A 9.4 BTU/hr.ft²/ft/ºF
Thermal Conductivity at 932°F N/A 12.4 BTU/hr.ft²/ft/ºF
Mean Coefficient of Thermal Expansion per °F (32 to 212°F) N/A 9.6 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 600°F) N/A 9.9 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 1000°F) N/A 10.2 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 1200°F) N/A 10.4 x 10-6 ºF
Melting Point Range N/A 2550 to 2650 ºF
Electrical Resistivity N/A 72 µΩ.cm
Max. Operating Temp. (Continuous Service) N/A 1650 ºF
Max. Operating Temp. (Intermittent Service) N/A 1500 ºF
Welding Properties N/A Very Good-Tough Welds
Drawing and Stamping N/A Very Good
Hot Working - Initial Forging N/A 2100 to 2300 ºF
Annealing Temp. N/A 1850 to 2050 ºF
Stress Relieving Temp. N/A 400 to 750 ºF
Applications N/A
  • Rapid transit cars, buses, aircraft, cargo containers
  • Retractor springs
  • Hose clamps
  • Conveyors
  • Bottling machinery
  • Jewelry
  • Cryogenic vessels and components
  • Still tubes
  • Expand metal parts
  • Mixing bowls
  • Dryers
  • Furnace parts
  • Heat exchangers
  • Paper mill equipment
  • Oil refining equipment
  • Textile industry
  • Dyeing equipment
  • Jet engine parts
  • Welded storage tanks for organic chemicals
  • Combustion chambers
  • Furnace arch supports
  • Kiln linings
  • Smoke control ductwork
  • Coal chutes
  • Gauge parts
  • Cutlery
  • Fish hooks
  • Glass molds
  • Bank vaults
  • Fasteners
  • Skewers
  • Dairy industry
  • Burner and emission control components
  • Recuperators
  • Pipes, tubes