Print Back
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form ("Alclad") with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.

6061-T6511
Stock Lengths 25' (Rounded Toes and Fillets)
AMS-QQ-A-200/16 AMS-QQ-A-200/8
(Except for Tolerances and Marking)
ASTM B308 UNS A96061
Metal & Alloy Angles
Unit of Measure
Items Metal & Alloy Angles
6061-T6511A-750-750-1250
Aluminum Structural Angles - Series 6061-T6511
Metal & Alloy Angles
6061-T6511A-1000-1000-1250
Aluminum Structural Angles - Series 6061-T6511
Metal & Alloy Angles
6061-T6511A-1000-1000-1875
Aluminum Structural Angles - Series 6061-T6511
Metal & Alloy Angles
6061-T6511A-1000-1000-2500
Aluminum Structural Angles - Series 6061-T6511
Metal & Alloy Angles
6061-T6511A-12500-12500-1250
Aluminum Structural Angles - Series 6061-T6511
Material N/A Aluminum
Shapeform N/A Structural Angles
Series N/A 6061-T6511
Grade N/A 6061
Temper N/A T6511
Size N/A 3/4 x 3/4 x 1/8 inches N/A 1 x 1 x 1/8 inches N/A 1 x 1 x 3/16 inches N/A 1 x 1 x 1/4 inches N/A 1 1/4 x 1 1/4 x 1/8 inches
Working Decimal Equivalent N/A 0.750 x 0.750 x 0.125 inches19.05 x 19.05 x 3.175 mm N/A 1.000 x 1.000 x 0.125 inches25.4 x 25.4 x 3.175 mm N/A 1.000 x 1.000 x 0.1875 inches25.4 x 25.4 x 4.7625 mm N/A 1.000 x 1.000 x0.250 inches25.4 x 25.4 x 6.35 mm N/A 1.250 x 1.250 x 0.125 inches31.75 x 31.75 x 3.175 mm
Dimension A N/A 3/4 inches N/A 1 inches N/A 1 inches N/A 1 inches N/A 1 1/4 inches
Dimension B N/A 3/4 inches N/A 1 inches N/A 1 inches N/A 1 inches N/A 1 1/4 inches
Thickness N/A 1/8 inches N/A 1/8 inches N/A 3/16 inches N/A 1/4 inches N/A 1/8 inches
Estimated Weight N/A 0.202 lbs/ft0.3006164 kg/m N/A 0.275 lbs/ft0.409255 kg/m N/A 0.40 lbs/ft0.59528 kg/m N/A 0.514 lbs/ft0.7649348 kg/m N/A 0.350 lbs/ft0.52087 kg/m
Estimated Weight per 25' Bar N/A 5.050 lbs2.29064162 kg N/A 6.875 lbs3.11844775 kg N/A 10.000 lbs4.535924 kg N/A 12.850 lbs5.82866234 kg N/A 8.750 lbs3.9689335 kg
ASTM Specification N/A AMS-QQ-A-200/16 AMS-QQ-A-200/8 ASTM B308 UNS A96061
Stock Length N/A 25 ft
Ultimate Strength N/A 45 ksi
Yield Strength N/A 40 ksi
Elongation percent in 2 inches N/A 12
Hardness Brinnel Number N/A 95
Ultimate Shearing Strength N/A 30 ksi
Fatigue Endurance Limit1 N/A 14 ksi
Modulus of Elasticity2 N/A 10.0 x 104 ksi
Resistance to Corrosion - General3 N/A B
Stress Corrosion Cracking4 N/A A
Workability (Cold)5 N/A C
Mechinability N/A C
Brazeability6 N/A A
Gas Weldability7 N/A A
Arc Weldability8 N/A A
Resistance Spot and Seam Weldability9 N/A A
Applications N/A Heavy-duty structures requiring good corrosion resistance, truck and marine, railroad cars, furniture, pipelines
Density N/A 0.098 lbs/inĀ³
Specific Gravity N/A 2.70
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test.
  • 5 Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit.
  • 6 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 8 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 9 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.