Print Back
Merchant Bar Quality

Only a minimum discard is made from each ingot, but bars should be free from visible piping. Seams and other surface irregularities may be present. Chemistry is subject to ladle analysis only. Easily machined, welded, and formed but not particularly recommended for forging, heat treating or complicated machining operations.
ASTM A36 - Bars designed for use in structural applications. Minimum physical properties of 36000 psi yield strength and 58000 psi tensile strength.
All Sizes available as hot dipped galvanized
AISI 1008 ASTM-A569. Stanard length 20'
aluminum strip
Unit of Measure
1 2 3 

Item #

Size

Working Decimal Equivalent

Estimated Weight

Estimaled Weight per 20 ft Bar

MEHRS-250-5000 N/A 1/4 x 5 inches N/A 0.250 x 5.000 inches6.35 x 127 mm N/A 4.250 lbs/ft6.324697 kg/m N/A 85.00 lbs38.556 kg
MEHRS-250-600 N/A 1/4 x 6 inches N/A 0.250 x 6.000 inches6.35 x 152.4 mm N/A 5.100 lbs/ft7.5896364 kg/m N/A 102.0 lbs46.2672 kg
MEHRS-250-700 N/A 1/4 x 7 inches N/A 0.250 x 7.000 inches6.35 x 177.8 mm N/A 5.950 lbs/ft8.8545758 kg/m N/A 119.00 lbs53.9784 kg
MEHRS-250-800 N/A 1/4 x 8 inches N/A 0.250 x 8.000 inches6.35 x 203.2 mm N/A 6.800 lbs/ft10.1195152 kg/m N/A 136.00 lbs61.6896 kg
MEHRS-250-10000 N/A 1/4 x 10 inches N/A 0.250 x 10.00 inches6.35 x 254 mm N/A 8.500 lbs/ft12.649394 kg/m N/A 170.00 lbs77.112 kg
MEHRS-250-12000 N/A 1/4 x 12 inches N/A 0.250 x 12.00 inches6.35 x 304.8 mm N/A 10.200 lbs/ft15.1792728 kg/m N/A 204.0 lbs92.5344 kg
Unit of Measure
1 2 3