Print Back
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.

Standard Lengths: 144" and 72"
Specifications:

CDA 954 ASTM B505
UNS 95400
Copper & Brass Bars
Unit of Measure
Items Copper & Brass Bars
ABSRB-500
Aluminum Bronze Solid Round Bar
Copper & Brass Bars
ABSRB-750
Aluminum Bronze Solid Round Bar
Copper & Brass Bars
ABSRB-1000
Aluminum Bronze Solid Round Bar
Copper & Brass Bars
ABSRB-1250
Aluminum Bronze Solid Round Bar
Copper & Brass Bars
ABSRB-1500
Aluminum Bronze Solid Round Bar
Material N/A Aluminum Bronze
Shapeform N/A Solid Round Bar
Nominal O.D. N/A 1/2 inches N/A 3/4 inches N/A 1 inches N/A 1 1/4 inches N/A 1 1/2 inches
Nominal O.D. N/A 1/2 inches12.70 mm N/A 3/4 inches19.05 mm N/A 1 inches25.40 mm N/A 1 1/4 inches31.75 mm N/A 1 1/2 inches38.10 mm
Weight N/A 0.8022 lbs/ft1.19383404 kg/m N/A 1.6737 lbs/ft2.49080034 kg/m N/A 2.8621 lbs/ft4.25937722 kg/m N/A 4.3674 lbs/ft6.49956468 kg/m N/A 6.1896 lbs/ft9.21136272 kg/m
Weight per 72" Length N/A 4.813 lbs2.1826955 kg N/A 10.042 lbs4.554047 kg N/A 17.173 lbs7.7879555 kg N/A 26.204 lbs11.883514 kg N/A 37.138 lbs16.842083 kg
Weight per 144" Length N/A 9.626 lbs4.365391 kg N/A 20.084 lbs9.108094 kg N/A 34.345 lbs15.5754575 kg N/A 52.409 lbs23.7674815 kg N/A 74.276 lbs33.684166 kg
ASTM Specification N/A ASTM B505 CDA 954 UNS 95400
Standard Length N/A 72 inches144 inches
Clean-up Allowances for I.D. N/A 1/32 inches
Clean-up Allowances for O.D. N/A 1/32 inches
Tolerance for I.D. N/A +0.012 inches-0.033 inches
Tolerance for O.D. N/A +0.004 inches-0.006 inches