Print Back
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form ("Alclad") with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.

6061-T6
Stock Lengths 25'
AMS-QQ-A-200/16
(Except for Tolerances and Markings)
AMS-QQ-A-200/8
68-a
Unit of Measure
Items 68-a
6061-T6B-400-400-313
American Standard Aluminum Wide Flange Beams
68-a
6061-T6B-600-600-240
American Standard Aluminum Wide Flange Beams
68-a
6061-T6B-800-650-245
American Standard Aluminum Wide Flange Beams
68-a
6061-T6B-800-800-288
American Standard Aluminum Wide Flange Beams
Material N/A Aluminum
Shapeform N/A I Beams
Series N/A 6061-T6
Grade N/A 6061
Temper N/A T6
Size N/A 4 x 4 x 0.313 inches101.6 x 101.6 x 7.9502 mm N/A 6 x 6 x 0.240 inches152.4 x 152.4 x 6.096 mm N/A 8 x 6.500 x 0.245 inches203.2 x 165.1 x 6.223 mm N/A 8 x 8 x 0.288 inches203.2 x 203.2 x 7.3152 mm
Dimension A N/A 4 inches N/A 6 inches N/A 8 inches N/A 8 inches
Dimension B N/A 4 inches N/A 6 inches N/A 6.5 inches N/A 8 inches
Thickness N/A 0.313 inches N/A 0.240 inches N/A 0.245 inches N/A 0.288 inches
Estimated Weight N/A 4.758 lbs/ft7.080684312 kg/m N/A 5.401 lbs/ft8.037573764 kg/m N/A 8.321 lbs/ft12.383012644 kg/m N/A 10.725 lbs/ft15.9605589 kg/m
Estimated Weight per 25' Bar N/A 118.950 lbs53.95572 kg N/A 135.025 lbs61.24734 kg N/A 208.025 lbs94.36014 kg N/A 268.125 lbs121.6215 kg
ASTM Specification N/A AMS-QQ-A-200/16 AMS-QQ-A-200/8
Stock Length N/A 25 ft
Flanges N/A Tapered N/A N/A N/A
Ultimate Strength N/A 45 ksi
Yield Strength N/A 40 ksi
Elongation percent in 2 inches N/A 17
Hardness Brinnel Number N/A 95
Ultimate Shearing Strength N/A 30 ksi
Fatigue Endurance Limit1 N/A 14 ksi
Modulus of Elasticity2 N/A 10.0 x 103 ksi
Resistance to Corrosion - General3 N/A B
Stress Corrosion Cracking N/A A
Workability (Cold) N/A C
Mechinability N/A C
Brazeability4 N/A A
Gas Weldability5 N/A A
Arc Weldability6 N/A A
Resistance Spot and Seam Weldability7 N/A A
Applications N/A Heavy-duty structures requiring good corrosion resistance, truck and marine, railroad cars, furniture, pipelines
Density N/A 0.098 lbs/inĀ³
Specific Gravity N/A 2.70
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 5 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 6 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.