Merchant Bar Quality
Only a minimum discard is made from each ingot, but bars should be free from visible piping. Seams and other surface irregularities may be present. Chemistry is subject to ladle analysis only. Easily machined, welded, and formed but not particularly recommended for forging, heat treating or complicated machining operations.
ASTM A36 - Bars designed for use in structural applications. Minimum physical properties of 36000 psi yield strength and 58000 psi tensile strength.
All Sizes available as hot dipped galvanized
A36 Square Edge. Standard lengths 20'
Only a minimum discard is made from each ingot, but bars should be free from visible piping. Seams and other surface irregularities may be present. Chemistry is subject to ladle analysis only. Easily machined, welded, and formed but not particularly recommended for forging, heat treating or complicated machining operations.
ASTM A36 - Bars designed for use in structural applications. Minimum physical properties of 36000 psi yield strength and 58000 psi tensile strength.
All Sizes available as hot dipped galvanized
A36 Square Edge. Standard lengths 20'
Unit of Measure
Specifications
Material |
N/A Steel |
Shapeform |
N/A Flat Bar |
Size |
N/A 1/4 x 7/8 inches |
Working Decimal Equivalent |
N/A 0.250 x 0.875 inches6.35 x 22.225 mm |
Thickness |
N/A 1/4 inches |
Width |
N/A 7/8 inches |
Estimated Weight |
N/A 0.744 lbs/ft1.107194016 kg/m |
Estimaled Weight per 20 ft Bar |
N/A 14.88 lbs6.749568 kg |
Standard Length |
N/A 20 ft |
