Hot Rolled, Annealed and Pickled
Non-Magnetic (May be slightly magnetic when cold-worked.)
A.S.T.M. A240/A480 A.S.T.M. A262 Prac E
ASME SA-240
Coils also may be custom leveled to your exact sizes.
Finish: Plates are available in #1 H.R.A.P.. 2B, #3, #4. Contact our sales department for sizes not shown.
Unit of Measure
Items
Metal and Alloy Plate & Coil

Stainless Steel Plate and Coil - Type 304H

Metal and Alloy Plate & Coil

Stainless Steel Plate and Coil - Type 304H

Metal and Alloy Plate & Coil

Stainless Steel Plate and Coil - Type 304H

Metal and Alloy Plate & Coil

Stainless Steel Plate and Coil - Type 304H

Metal and Alloy Plate & Coil

Stainless Steel Plate and Coil - Type 304H
Material N/A Type 304H Stainless Steel
Shapeform N/A Coil N/A Plates N/A Plates N/A Coil N/A Plates
Thickness N/A 3/16 inches
Thickness N/A 0.1875 inches4.7625 mm
Size N/A 36 x Coil N/A 36 x 96 N/A 36 x 120 N/A 48 x Coil N/A 48 x 96
Width N/A 36 N/A 36 N/A 36 N/A 48 N/A 48
Length N/A N/A 96 N/A 120 N/A N/A 96
Plate Weight per Unit Area N/A 8.579 lbs/ft²41.882678 kg/m² N/A N/A N/A N/A
Weight per Plate N/A N/A 206 lbs93.318 kg N/A 257 lbs116.421 kg N/A N/A 275 lbs124.575 kg
Finish N/A No. 2D N/A No. 2D N/A No. 2D N/A No. 2B No. 2D N/A No. 2D
Condition N/A Hot Rolled Annealed Pickled
Nominal Composition N/A 0.04% Max. Carbon 1.00% Max. Silicon 2.00% Max. Manganese 6 to 36% Nickel 7 to 30% Chrome
ASTM Specification N/A ASTM A240 ASTM A262 Prac E ASTM A480 ASTM SA-240 UNS S30409
Stock Length N/A N/A N/A N/A 96 120 144 240 288 N/A
Steel Alloy Group
N/A Austenitic
Magnetic Properties N/A Non-Magnetic
Harden By N/A Cold Work
Corrosion Resistance N/A High
Hardness N/A Low to Med.
Strength N/A Low to Med.
Ductility N/A High
Toughness N/A High
Elec. Conductance N/A Low
Thermal Conductance N/A Low
Thermal Expansion N/A High
Heat Resistance (Scaling Strength) N/A High/High
Yield Strength N/A 39000 lbs/in²
Tensile Strength N/A 87000 lbs/in²
Elongation percent in 2 inches N/A 56 %
Hardness (Rockwell B) N/A 82
Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F N/A 17000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F N/A 12000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F N/A 7000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F N/A 4000 lbs/in²
Density N/A 0.29 lbs/in³
Modulus of Elasticity in Tension N/A 28.0 x 106 lbs/in²
Specific Heat (32 to 212°F) N/A 0.12 BTU/ºF/lbs
Thermal Conductivity at 212°F N/A 9.4 BTU/hr.ft²/ft/ºF
Thermal Conductivity at 932°F N/A 12.4 BTU/hr.ft²/ft/ºF
Mean Coefficient of Thermal Expansion per °F (32 to 212°F) N/A 9.6 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 600°F) N/A 9.9 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 1000°F) N/A 10.2 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 1200°F) N/A 10.4 x 10-6 ºF
Melting Point Range N/A 2550 to 2650 ºF
Electrical Resistivity N/A 72 µΩ.cm
Max. Operating Temp. (Continuous Service) N/A 1650 ºF
Max. Operating Temp. (Intermittent Service) N/A 1500 ºF
Welding Properties N/A Excellent
Drawing and Stamping N/A Good
Hot Working - Initial Forging N/A 2100 to 2300 ºF
Annealing Temp. N/A 1850 to 2050 ºF
Stress Relieving Temp. N/A 400 to 750 ºF
Applications N/A
  • Rapid transit cars, buses, aircraft, cargo containers
  • Retractor springs
  • Hose clamps
  • Conveyors
  • Bottling machinery
  • Jewelry
  • Cryogenic vessels and components
  • Still tubes
  • Expand metal parts
  • Mixing bowls
  • Dryers
  • Furnace parts
  • Heat exchangers
  • Paper mill equipment
  • Oil refining equipment
  • Textile industry
  • Dyeing equipment
  • Jet engine parts
  • Welded storage tanks for organic chemicals
  • Combustion chambers
  • Furnace arch supports
  • Kiln linings
  • Smoke control ductwork
  • Coal chutes
  • Gauge parts
  • Cutlery
  • Fish hooks
  • Glass molds
  • Bank vaults
  • Fasteners
  • Skewers
  • Dairy industry
  • Burner and emission control components
  • Recuperators
  • Pipes, tubes