Cold Drawn - Annealed
10' - 14' Random Lengths
A.S.T.M. A276 (except 303)

Continental Steel will cut to any length you desire. With our precision high-speed equipment, we can give prompt attention to large and small cut piece requirements.
Unit of Measure
Items
443-Square

Square Stainless Steel Bar - Type 316

443-Square

Square Stainless Steel Bar - Type 316

443-Square

Square Stainless Steel Bar - Type 316

443-Square

Square Stainless Steel Bar - Type 316

443-Square

Square Stainless Steel Bar - Type 316
Material N/A Type 316 Stainless Steel
Shapeform N/A Square Bar
Size N/A 1/8 inches N/A 3/16 inches N/A 1/4 inches N/A 5/16 inches N/A 3/8 inches
Size N/A 0.125 inches3.175 mm N/A 0.1875 inches4.7625 mm N/A 0.25 inches6.35 mm N/A 0.3125 inches7.9375 mm N/A 0.375 inches9.525 mm
Weight N/A 0.0531 lbs/ft0.0790128 kg/m N/A 0.1196 lbs/ft0.1779648 kg/m N/A 0.2126 lbs/ft0.3163488 kg/m N/A 0.3321 lbs/ft0.4941648 kg/m N/A 0.4782 lbs/ft0.7115616 kg/m
Weight per 12' Length N/A 0.638 lbs0.289014 kg N/A 1.435 lbs0.650055 kg N/A 2.551 lbs1.155603 kg N/A 3.985 lbs1.805205 kg N/A 5.739 lbs2.599767 kg
Finish N/A No. 2B
Condition N/A Cold Drawn Annealed
Nominal Composition N/A 0 to 0.25% Carbon 1.00% Max. Silicon 2.00% Max. Manganese 6 to 36% Nickel 7 to 30% Chrome
ASTM Specification N/A ASTM A276 UNS S31600
Random Length N/A 10 to 14 ft
Steel Alloy Group
N/A Austenitic
Magnetic Properties N/A Non-Magnetic
Harden By N/A Cold Work
Corrosion Resistance N/A High
Hardness N/A Low to Med.
Strength N/A Low to Med.
Ductility N/A High
Toughness N/A High
Elec. Conductance N/A Low
Thermal Conductance N/A Low
Thermal Expansion N/A High
Heat Resistance (Scaling Strength) N/A High/High
Yield Strength N/A 45000 lbs/in²
Tensile Strength N/A 18200 lbs/in²
Elongation percent in 2 inches N/A 50 %
Hardness (Rockwell B) N/A 83
Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F N/A 25000 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F N/A 18200 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F N/A 12700 lbs/in²
Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F N/A 7900 lbs/in²
Density N/A 0.29 lbs/in³
Modulus of Elasticity in Tension N/A 29.0 x 106 lbs/in²
Specific Heat (32 to 212°F) N/A 0.12 BTU/ºF/lbs
Thermal Conductivity at 212°F N/A 9.4 BTU/hr.ft²/ft/ºF
Thermal Conductivity at 932°F N/A 12.4 BTU/hr.ft²/ft/ºF
Mean Coefficient of Thermal Expansion per °F (32 to 212°F) N/A 8.8 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 600°F) N/A 9.0 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 1000°F) N/A 9.7 x 10-6 ºF
Mean Coefficient of Thermal Expansion per °F (32 to 1200°F) N/A 10.3 x 10-6 ºF
Melting Point Range N/A 2500 to 2550 ºF
Electrical Resistivity N/A 74 µΩ.cm
Max. Operating Temp. (Continuous Service) N/A 1650 ºF
Max. Operating Temp. (Intermittent Service) N/A 1500 ºF
Welding Properties N/A Very Good-Tough Welds
Drawing and Stamping N/A Good
Hot Working - Initial Forging N/A 2100 to 2300 ºF
Annealing Temp. N/A 1850 to 2050 ºF
Stress Relieving Temp. N/A 400 to 750 ºF
Applications N/A
  • Rapid transit cars, buses, aircraft, cargo containers
  • Retractor springs
  • Hose clamps
  • Conveyors
  • Bottling machinery
  • Jewelry
  • Cryogenic vessels and components
  • Still tubes
  • Expand metal parts
  • Mixing bowls
  • Dryers
  • Furnace parts
  • Heat exchangers
  • Paper mill equipment
  • Oil refining equipment
  • Textile industry
  • Dyeing equipment
  • Jet engine parts
  • Welded storage tanks for organic chemicals
  • Combustion chambers
  • Furnace arch supports
  • Kiln linings
  • Smoke control ductwork
  • Coal chutes
  • Gauge parts
  • Cutlery
  • Fish hooks
  • Glass molds
  • Bank vaults
  • Fasteners
  • Skewers
  • Dairy industry
  • Burner and emission control components
  • Recuperators
  • Pipes, tubes