6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.

6063-T6
Schedule 40
20' Lengths Stenciled
ASTM B241 UNS A96063
Unit of Measure
Items
Metal & Alloy Angles & Tubing

Seamless Aluminum Pipe - Series 6063-T6 Schedule 40

Metal & Alloy Angles & Tubing

Seamless Aluminum Pipe - Series 6063-T6 Schedule 40

Metal & Alloy Angles & Tubing

Seamless Aluminum Pipe - Series 6063-T6 Schedule 40

Metal & Alloy Angles & Tubing

Seamless Aluminum Pipe - Series 6063-T6 Schedule 40

Metal & Alloy Angles & Tubing

Seamless Aluminum Pipe - Series 6063-T6 Schedule 40
Material N/A Aluminum
Shapeform N/A Pipe
Series N/A 6063-T6
Grade N/A 6063
Preparation N/A Stenciled
Temper N/A T6
Standard N/A Schedule 40
Nominal Size N/A 1 inches N/A 1 1/4 inches N/A 1 1/2 inches N/A 2 inches N/A 2 1/2 inches
Nominal Size N/A 1 inches25.4 mm N/A 1.25 inches31.75 mm N/A 1.5 inches38.1 mm N/A 2 inches50.8 mm N/A 2.5 inches63.5 mm
O.D. N/A 1.315 inches33.401 mm N/A 1.66 inches42.164 mm N/A 1.9 inches48.26 mm N/A 2.375 inches60.325 mm N/A 2.875 inches73.025 mm
I.D. N/A 1.049 inches26.6446 mm N/A 1.380 inches35.052 mm N/A 1.610 inches40.894 mm N/A 2.067 inches52.5018 mm N/A 2.469 inches62.7126 mm
Wall Thickness N/A 0.133 inches3.3782 mm N/A 0.140 inches3.556 mm N/A 0.145 inches3.683 mm N/A 0.154 inches3.9116 mm N/A 0.203 inches5.1562 mm
Weight N/A 0.5749 lbs/ft0.8555454836 kg/m N/A 0.7782 lbs/ft1.1580892248 kg/m N/A 0.9306 lbs/ft1.3848854184 kg/m N/A 1.2508 lbs/ft1.8613955312 kg/m N/A 1.9835 lbs/ft2.951773294 kg/m
Weight per 20' N/A 11.497 lbs5.2150392 kg N/A 15.563 lbs7.0593768 kg N/A 18.611 lbs8.4419496 kg N/A 25.015 lbs11.346804 kg N/A 39.670 lbs17.994312 kg
ASTM Specification N/A ASME SB-241 ASME SB241M ASTM B241 ASTM B241M Mil-P-25995 UNS A96063
Length N/A 20 ft
Ultimate Strength N/A 35 ksi
Yield Strength N/A 31 ksi
Elongation percent in 2 inches N/A 12
Hardness Brinnel Number
N/A 73
Ultimate Shearing Strength N/A 22 ksi
Fatigue Endurance Limit1 N/A 10 ksi
Modulus of Elasticity2 N/A 10.0 x 103 ksi
Resistance to Corrosion - General3 N/A A
Stress Corrosion Cracking N/A A
Workability (Cold) N/A C
Mechinability N/A C
Brazeability4 N/A A
Gas Weldability5 N/A A
Arc Weldability6 N/A A
Resistance Spot and Seam Weldability7 N/A A
Applications N/A Pipe railing, furniture, architectural extrusions
Density N/A 0.097 lbs/in³
Specific Gravity N/A 2.70
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 5 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 6 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.