3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils. decorative trim, awnings, siding, storage tanks, chemical equipment.

3003-0
50' Coils Soft Annealed All Purpose
ASTM B483 AMS 4065 UNS A93003
Request Information
Unit of Measure
Items
Aluminum Tubing & Pipe

Coiled Aluminum Tube
Aluminum Tubing & Pipe

Coiled Aluminum Tube
Aluminum Tubing & Pipe

Coiled Aluminum Tube
Aluminum Tubing & Pipe

Coiled Aluminum Tube
Aluminum Tubing & Pipe

Coiled Aluminum Tube
Material N/A Aluminum
Shapeform N/A Tubes Tubing
Series N/A 3003-0
Grade N/A 3003
Condition N/A Soft Annealed All Purpose
Temper N/A Soft
O.D. N/A 1/8 inches N/A 3/16 inches N/A 1/4 inches N/A 5/16 inches N/A 3/8 inches
O.D. N/A 1/8 inches3.175 mm N/A 3/16 inches4.7625 mm N/A 1/4 inches6.35 mm N/A 5/16 inches7.9375 mm N/A 3/8 inches9.525 mm
Wall Thickness N/A 0.025 inches0.6350 mm N/A 0.028 inches0.7112 mm N/A 0.032 inches0.8128 mm N/A 0.035 inches0.8890 mm N/A 0.035 inches0.8890 mm
Weight per Coil N/A 0.467 lbs0.2117845 kg N/A 0.833 lbs0.3777655 kg N/A 1.302 lbs0.590457 kg N/A 1.812 lbs0.821742 kg N/A 2.221 lbs1.0072235 kg
ASTM Specification N/A AMS 4065 ASTM 8483 UNS A93003
Coil Length N/A 50 ft
Ultimate Strength N/A 16 ksi
Yield Strength N/A 6 ksi
Elongation percent in 2 inches N/A 30
Hardness Brinnel Number
N/A 28
Ultimate Shearing Strength N/A 11 ksi
Fatigue Endurance Limit1 N/A 7 ksi
Modulus of Elasticity2 N/A 10.0 x 103 ksi
Resistance to Corrosion - General3 N/A A
Stress Corrosion Cracking N/A A
Workability (Cold) N/A A
Mechinability N/A E
Brazeability4 N/A A
Gas Weldability5 N/A A
Arc Weldability6 N/A A
Resistance Spot and Seam Weldability7 N/A B
Applications N/A Cooking utensils, chemical equipment, pressure vessels, sheet metal work, builder's hardware, storage tanks
Density N/A 0.099 lbs/in³
Specific Gravity N/A 2.73
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 5 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 6 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.