Aluminum Sheet and Coil - Series 3003-H14

3003 is the most widely used of all aluminum alloys. It is essentially commercially pure aluminum with the addition of manganese which increases the strength some 20% over the 1100 grade. Thus, it has all the excellent characteristics of 1100 with higher strength. It has excellent corrosion resistance. It has excellent workability and it may be deep drawn or spun, welded or brazed. It is non heat treatable. Applications: cooking utensils, decorative trim, awnings, siding, storage tanks, chemical equipment.

3003-H14
Mill Finish
AMS-QQ-A-250/2 AMS 4008 ASTM B209

Request Information Search by Specification

Unit of Measure

Items	3003-H14-016-36-C Aluminum Sheet and Coil - Series 3003-H14	3003-H14-016-36-96 Aluminum Sheet and Coil - Series 3003-H14	3003-H14-016-36-120 Aluminum Sheet and Coil - Series 3003-H14	3003-H14-020-36-C Aluminum Sheet and Coil - Series 3003-H14	3003-H14-020-36-96 Aluminum Sheet and Coil - Series 3003-H14
Material	N/A Aluminum
Shapeform	N/A Coil	N/A Sheets	N/A Sheets	N/A Coil	N/A Sheets
Series	N/A 3003-H14
Grade	N/A 3003
Temper	N/A H14
Finish	N/A Mill
Thickness	N/A 0.016 inches0.4064 mm	N/A 0.016 inches0.4064 mm	N/A 0.016 inches0.4064 mm	N/A 0.02 inches0.508 mm	N/A 0.02 inches0.508 mm
Size	N/A 36 x Coil	N/A 36 x 96	N/A 36 x 120	N/A 36 x Coil	N/A 36 x 96
Width	N/A 36
Length	N/A	N/A 96	N/A 120	N/A	N/A 96
Sheet Weight per Unit Area	N/A 0.228 lbs/ft²1.113 kg/m²	N/A	N/A	N/A 0.285 lbs/ft²1.391 kg/m²	N/A
Weight per Sheet	N/A	N/A 5.47 lbs2.481 kg	N/A 6.84 lbs3.103 kg	N/A	N/A 6.84 lbs3.103 kg
Coil Weight per Length	N/A 0.684 lbs/ft1.018 kg/m	N/A	N/A	N/A 0.855 lbs/ft1.272 kg/m	N/A
ASTM Specification	N/A AMS 4008 AMS-QQ-A-250/2 ASME SB-209 ASTM B209
Ultimate Strength	N/A 22 ksi
Yield Strength	N/A 21 ksi
Elongation percent in 2 inches	N/A 8
Hardness Brinnel Number	N/A 40
Ultimate Shearing Strength	N/A 14 ksi
Fatigue Endurance Limit¹	N/A 9 ksi
Modulus of Elasticity²	N/A 10.0 x 10⁶ ksi
Resistance to Corrosion - General³	N/A A
Stress Corrosion Cracking⁴	N/A A
Workability (Cold)⁵	N/A B
Mechinability	N/A D
Brazeability⁶	N/A A
Gas Weldability⁷	N/A A
Arc Weldability⁸	N/A A
Resistance Spot and Seam Weldability⁹	N/A A
Applications	N/A Cooking utensils, chemical equipment, pressure vessels, sheet metal work, builder's hardware, storage tanks
Density	N/A 0.099 lbs/in³
Specific Gravity	N/A 2.73
¹ Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen. ² Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ³ Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces. ⁴ Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test. ⁵ Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit. ⁶ Ratings A through D for Weldability and Brazeability are relative ratings. ⁷ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁸ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁹ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.

Products Catalog