Item # 316L-24-36-C, Stainless Steel Sheet and Coil - Type 316L On Continental Steel & Tube Co.

All Categories > Stainless Steel > Stainless Steel Sheet and Coil > Stainless Steel Sheet and Coil - Type 316L > Item # 316L-24-36-C


	Item # 316L-24-36-C, Stainless Steel Sheet and Coil - Type 316L

larger image

Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E

Unit of Measure: Imperial

Specifications · Typical Mechanical Properties · Comparative Characteristics and Applications · Applications

Specifications

Material		Type 316L Stainless Steel

Shapeform		Coil

Preparation		Paper Interleaved Vinyl Masked

Thickness		24 gauge

Thickness		0.0235 inches

Size		36 x Coil

Width		36

Sheet Weight per Unit Area		1.008 lbs/ft²

Finish		No. 2B No. 3 No. 4

Condition		Cold Rolled Annealed

Nominal Composition		0 to 0.25% Carbon 1.00% Max. Silicon 2.00% Max. Manganese 6 to 36% Nickel 7 to 30% Chrome

ASTM Specification		ASTM A240 ASTM A262 Prac E ASTM A480 ASTM SA-240 UNS S31603

Typical Mechanical Properties

Steel Alloy Group		Austenitic

Magnetic Properties		Non-Magnetic

Harden By		Cold Work

Corrosion Resistance		High

Hardness		Low to Med.

Strength		Low to Med.

Ductility		High

Toughness		High

Elec. Conductance		Low

Thermal Conductance		Low

Thermal Expansion		High

Heat Resistance (Scaling Strength)		High/High

Comparative Characteristics and Applications

Yield Strength		45000 lbs/in²

Tensile Strength		18200 lbs/in²

Elongation percent in 2 inches		50 %

Hardness (Rockwell B)		83

Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F		25000 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F		7900 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F		7900 lbs/in²

Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F		7900 lbs/in²

Density		0.29 lbs/in³

Modulus of Elasticity in Tension		29.0 x 10⁶ lbs/in²

Specific Heat (32 to 212°F)		0.12 BTU/ºF/lbs

Thermal Conductivity at 212°F		9.04 BTU/hr.ft²/ft/ºF

Thermal Conductivity at 932°F		12.4 BTU/hr.ft²/ft/ºF

Mean Coefficient of Thermal Expansion per °F (32 to 212°F)		8.8 x 10^-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 600°F)		9.0 x 10^-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1000°F)		9.7 x 10^-6 ºF

Mean Coefficient of Thermal Expansion per °F (32 to 1200°F)		10.3 x 10^-6 ºF

Melting Point Range		2500 to 2550 ºF

Electrical Resistivity		74 µΩ.cm

Max. Operating Temp. (Continuous Service)		1700 ºF

Max. Operating Temp. (Intermittent Service)		1600 ºF

Welding Properties		Good

Drawing and Stamping		Good

Hot Working - Initial Forging		2100 to 2300 ºF

Annealing Temp.		1950 to 2050 ºF

Stress Relieving Temp.		400 to 750 ºF

Applications

Rapid transit cars, buses, aircraft, cargo containers
Retractor springs
Hose clamps
Conveyors
Bottling machinery
Jewelry
Cryogenic vessels and components
Still tubes
Expand metal parts
Mixing bowls
Dryers
Furnace parts
Heat exchangers
Paper mill equipment
Oil refining equipment
Textile industry
Dyeing equipment
Jet engine parts
Welded storage tanks for organic chemicals
Combustion chambers
Furnace arch supports
Kiln linings
Smoke control ductwork
Coal chutes
Gauge parts
Cutlery
Fish hooks
Glass molds
Bank vaults
Fasteners
Skewers
Dairy industry
Burner and emission control components
Recuperators
Pipes, tubes

DOWNLOADS


		Terminology Sheet

		Types Finishes Spec Sheet

Item # 316L-24-36-C, Stainless Steel Sheet and Coil - Type 316L

Material

Shapeform

Preparation

Thickness

Thickness

Size

Width

Sheet Weight per Unit Area

Finish

Condition

Nominal Composition

ASTM Specification

Steel Alloy Group

Magnetic Properties

Harden By

Corrosion Resistance

Hardness

Strength

Ductility

Toughness

Elec. Conductance

Thermal Conductance

Thermal Expansion

Heat Resistance (Scaling Strength)

Yield Strength

Tensile Strength

Elongation percent in 2 inches

Hardness (Rockwell B)

Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F

Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F

Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F

Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F

Density

Modulus of Elasticity in Tension

Specific Heat (32 to 212°F)

Thermal Conductivity at 212°F

Thermal Conductivity at 932°F

Mean Coefficient of Thermal Expansion per °F (32 to 212°F)

Mean Coefficient of Thermal Expansion per °F (32 to 600°F)

Mean Coefficient of Thermal Expansion per °F (32 to 1000°F)

Mean Coefficient of Thermal Expansion per °F (32 to 1200°F)

Melting Point Range

Electrical Resistivity

Max. Operating Temp. (Continuous Service)

Max. Operating Temp. (Intermittent Service)

Welding Properties

Drawing and Stamping

Hot Working - Initial Forging

Annealing Temp.

Stress Relieving Temp.