Galvanized is a term long used to describe steel sheets coated with zinc. Usually associated with the hot dipped process but the zinc coating can also be applied by electroplating. Our hot dipped galvanized sheets are produced to conform with ASTM A525. Electrogalvanized conforms to ASTM A591

The producing mills have accomplished many technological advancements in recent years in the manufacture of both hot dipped and electrogalvanized sheets. The end use should determine the type of coated product and surface condition required. Regardless of the coating weight, spangle size, method of manufacture or surface preparation required Following are descriptions of the grades and conditions of galvanized sheets used most often.

Commercial Quality - Low Carbon
Unit of Measure

Specifications

Material

N/A Steel

Shapeform

N/A Galvanized Sheet

Thickness

N/A 16 gauge

Thickness

N/A 0.0635 inches1.6129 mm

Size

N/A 48 x 96

Width

N/A 48

Length

N/A 96

Sheet Weight per Unit Area

N/A 2.66 lbs/ft²12.98612 kg/m²

Estimated Weight per Sheet

N/A 85 lbs38.505 kg

Thickness Tolerance

N/A 0.0695 to 0.0575 inches