Galvanized is a term long used to describe steel sheets coated with zinc. Usually associated with the hot dipped process but the zinc coating can also be applied by electroplating. Our hot dipped galvanized sheets are produced to conform with ASTM A525. Electrogalvanized conforms to ASTM A591

The producing mills have accomplished many technological advancements in recent years in the manufacture of both hot dipped and electrogalvanized sheets. The end use should determine the type of coated product and surface condition required. Regardless of the coating weight, spangle size, method of manufacture or surface preparation required Following are descriptions of the grades and conditions of galvanized sheets used most often.

Commercial Quality - Low Carbon
Unit of Measure



N/A Steel


N/A Galvanized Sheet


N/A 12 gauge


N/A 0.1084 inches2.75336 mm


N/A 48 x 96


N/A 48


N/A 96

Sheet Weight per Unit Area

N/A 4.53 lbs/ft²22.11546 kg/m²

Estimated Weight per Sheet

N/A 145.0 lbs65.685 kg

Thickness Tolerance

N/A 0.1174 to 0.0994 inches