Continental Steel and Tube Company
Continental Steel and Tube Company
P.O. BOX 030040
Fort Lauderdale, FL, 33303
Phone: 954.332.2290
Fax: 954.332.2296
Email: Sales@ContinentalSteel.com
Website: www.continentalsteel.com
Print Back
Monel® 400 is a nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies.

Alloy 400 Pipe is available in Seamless or Welded from Size ranges 1/8" up to 26". Listed below are common sizes. Please contact for sizes not listed.
Unit of Measure

Specifications

Material

 N/A Monel®

Shapeform

 N/A Pipe

Thickness

 N/A Sch. 40

O.D.

 N/A 14 inches355.6 mm

Nominal Diameter (Standard)

 N/A 14 inches

Nominal Diameter (Metric)

 N/A 350 mm

Yield Strength

 N/A 240 MPa

Nickel Alloy Compositions

Alloy

 N/A Monel® 400

Basic Composition

 N/A 1.1% Manganese 1.6% Iron 32.0% Copper 65.1% Nickel

Density

 N/A 0.319 lbs/in³8.84 g/cm³

ASTM Specification

 N/A ASME SB-163(s) ASME SB-165(s) ASTM B163(s) ASTM B165(s) ASTM B725(w) ASTM B730(w) SAE 4574(b) SAE 4574(s) UNS N04400

Typical Mechanical Properties

Tensile Strength

 N/A 80000 psi550 MPa

Melting Temperature Range

 N/A 2370 to 2460 ºF1300 to 1350 ºC

Additional Information

Additional Information

 N/A A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid and alkalies. Used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners and heat exchangers. Standard product forms are round, hexagon, flats, forging stock, pipe, tube, plate, sheet, strip and wire.