Continental Steel and Tube Company
Continental Steel and Tube Company
P.O. BOX 030040
Fort Lauderdale, FL, 33303
Phone: 954.332.2290
Fax: 954.332.2296
Email: Sales@ContinentalSteel.com
Website: www.continentalsteel.com
Print Back
Aluminum Bronze - Malleability, strength and good corrosion resistance to liquids and gasses make this alloy good for bolts and screw products, and components for pole line hardware.
Applications: Recommended for heavier duty applications involving wear abrasion and fatigue, such as worm gears and wheels, adjusting nuts, collets, plungers, pump rods, sleeve bearings, valve and guide pin bushings. Aluminum bronze, in extruded and continuous cast rectangular bar, provides maximum metal-to-metal wear resistance for wear plates, guides, support trails, hold-down bars, gibs and wear, liners, fingers, straightening dies, racks, work rest blades, runout table slides, wear strips, shoes, mold inserts and scraper blades.

Standard Lengths: 144" and 72"
Specifications:
CDA 954 ASTM B505
UNS 95400
Unit of Measure

Specifications

Material

 N/A Aluminum Bronze

Shapeform

 N/A Solid Round Bar

Nominal O.D.

 N/A 1 1/2 inches

Nominal O.D.

 N/A 1 1/2 inches38.10 mm

Weight

 N/A 6.1896 lbs/ft9.21136272 kg/m

Weight per 72" Length

 N/A 37.138 lbs16.842083 kg

Weight per 144" Length

 N/A 74.276 lbs33.684166 kg

ASTM Specification

 N/A ASTM B505 CDA 954 UNS 95400

Standard Length

 N/A 72 inches144 inches

Dimensional Specifications

Clean-up Allowances for I.D.

 N/A 1/32 inches

Clean-up Allowances for O.D.

 N/A 1/32 inches

Tolerance for I.D.

 N/A +0.012 inches-0.033 inches

Tolerance for O.D.

 N/A +0.004 inches-0.006 inches