Aluminum Hexagons - Series 6061

6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form ("Alclad") with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.

6061-T6 6061-T651
AMS-QQ-A-225/8 AMS 4117 ASTM B211 UNS A96061

Unit of Measure

Items	6061-T6H-250 Aluminum Hexagons - Series 6061	6061-T651H-500 Aluminum Hexagons - Series 6061	6061-T651H-750 Aluminum Hexagons - Series 6061	6061-T651H-1000 Aluminum Hexagons - Series 6061	6061-T651H-1250 Aluminum Hexagons - Series 6061
Material	N/A Aluminum
Shapeform	N/A Hexagons
Series	N/A 6061-T6	N/A 6061-T651	N/A 6061-T651	N/A 6061-T651	N/A 6061-T651
Grade	N/A 6061
Temper	N/A T6	N/A T651	N/A T651	N/A T651	N/A T651
Size	N/A 1/4 inches	N/A 1/2 inches	N/A 3/4 inches	N/A 1 inches	N/A 1 1/4 inches
Size	N/A 0.25 inches6.35 mm	N/A 0.5 inches12.7 mm	N/A 0.75 inches19.05 mm	N/A 1 inches25.4 mm	N/A 1.25 inches31.75 mm
Estimated Weight	N/A 0.0637 lbs/ft0.0947960468 kg/m	N/A 0.2546 lbs/ft0.3788865544 kg/m	N/A 0.5729 lbs/ft0.8525691556 kg/m	N/A 1.0184 lbs/ft1.5155462176 kg/m	N/A 1.5913 lbs/ft2.3681153732 kg/m
Estimated Weight per 12' Bar	N/A 0.764 lbs0.3465445936 kg	N/A 3.055 lbs1.385724782 kg	N/A 6.874 lbs3.1179941576 kg	N/A 12.221 lbs5.5433527204 kg	N/A 19.095 lbs8.661346878 kg
ASTM Specification	N/A AMS 4117 AMS-QQ-A-225/8 ASTM B211 UNS A96061
Ultimate Strength	N/A 45 ksi
Yield Strength	N/A 40 ksi
Elongation percent in 2 inches	N/A 17
Hardness Brinnel Number	N/A 95
Ultimate Shearing Strength	N/A 30 ksi
Fatigue Endurance Limit¹	N/A 14 ksi
Modulus of Elasticity²	N/A 10.0 x 10⁴ ksi
Resistance to Corrosion - General³	N/A B
Stress Corrosion Cracking⁴	N/A A
Workability (Cold)⁵	N/A C
Mechinability	N/A C
Brazeability⁶	N/A A
Gas Weldability⁷	N/A A
Arc Weldability⁸	N/A A
Resistance Spot and Seam Weldability⁹	N/A A
Applications	N/A Heavy-duty structures requiring good corrosion resistance, truck and marine, railroad cars, furniture, pipelines
Density	N/A 0.098 lbs/in³
Specific Gravity	N/A 2.70
¹ Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen. ² Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ³ Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces. ⁴ Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test. ⁵ Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit. ⁶ Ratings A through D for Weldability and Brazeability are relative ratings. ⁷ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁸ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁹ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.