Print Back
6061 is the least expensive and most versatile of the heat-treatable aluminum alloys. It has most of the good qualities of aluminum. It offers a range of good mechanical properties and good corrosion resistance. It can be fabricated by most of the commonly used techniques. In the annealed condition it has good workability. In the T4 condition fairly severe forming operations may be accomplished. The full T6 properties may be obtained by artificial aging. It is welded by all methods and can be furnace brazed. It is available in the clad form ("Alclad") with a thin surface layer of high purity aluminum to improve both appearance and corrosion resistance. Applications: This grade is used for a wide variety of products and applications from truck bodies and frames to screw machine parts and structural components. 6061 is used where appearance and better corrosion resistance with good strength are required.

6061-T6
Stock Lengths 25'
AMS-QO-A-200/16
(Except for Tolerances and Markings) AMS-QQ-A-200/8
68
Unit of Measure
Items 68
6061-T6B-400-3000-170
Aluminum Association I Beams
68
6061-T6B-500-3500-190
Aluminum Association I Beams
68
6061-T6B-600-4000-190
Aluminum Association I Beams
68
6061-T6B-600-4000-210
Aluminum Association I Beams
68
6061-T6B-8-5000-230
Aluminum Association I Beams
Material N/A Aluminum
Shapeform N/A I Beams
Series N/A 6061-T6
Grade N/A 6061
Temper N/A T6
Size N/A 4 x 3.000 x 0.170 inches101.6 x 76.2 x 4.318 mm N/A 5 x 3.500 x 0.190 inches127 x 88.9 x 4.826 mm N/A 6 x 4.000 x 0.190 inches152.4 x 101.6 x 4.826 mm N/A 6 x 4.000 x 0.210 inches152.4 x 101.6 x 5.334 mm N/A 8 x 5.000 x 0.230 inches203.2 x 127 x 5.842 mm
Dimension A N/A 4 inches N/A 5 inches N/A 6 inches N/A 6 inches N/A 8 inches
Dimension B N/A 3 inches N/A 3.500 inches N/A 4 inches N/A 4 inches N/A 5 inches
Thickness N/A 0.170 inches N/A 0.190 inches N/A 0.190 inches N/A 0.210 inches N/A 0.230 inches
Estimated Weight N/A 2.793 lbs/ft4.156442052 kg/m N/A 3.700 lbs/ft5.5062068 kg/m N/A 4.030 lbs/ft5.99730092 kg/m N/A 4.692 lbs/ft6.982465488 kg/m N/A 6.181 lbs/ft9.198341684 kg/m
Estimated Weight per 25' Bar N/A 69.825 lbs31.67262 kg N/A 92.500 lbs41.958 kg N/A 100.750 lbs45.7002 kg N/A 117.300 lbs53.20728 kg N/A 154.525 lbs70.09254 kg
ASTM Specification N/A AMS-QO-A-200/8 AMS-QQ-A-200/16
Stock Length N/A 25 ft
Ultimate Strength N/A 45 ksi
Yield Strength N/A 40 ksi
Elongation percent in 2 inches N/A 17
Hardness Brinnel Number N/A 95
Ultimate Shearing Strength N/A 30 ksi
Fatigue Endurance Limit1 N/A 14 ksi
Modulus of Elasticity2 N/A 10.0 x 103 ksi
Resistance to Corrosion - General3 N/A B
Stress Corrosion Cracking N/A A
Workability (Cold) N/A C
Mechinability N/A C
Brazeability4 N/A A
Gas Weldability5 N/A A
Arc Weldability6 N/A A
Resistance Spot and Seam Weldability7 N/A A
Applications N/A Heavy-duty structures requiring good corrosion resistance, truck and marine, railroad cars, furniture, pipelines
Density N/A 0.098 lbs/inĀ³
Specific Gravity N/A 2.70
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 5 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 6 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.