| Items |
 /Asset/Stainless-Steel-Plate.jpg 309S-16-48-96 Stainless Steel Sheet - Type 309S |
/Asset/Stainless-Steel-Plate.jpg 309S-16-48-120 Stainless Steel Sheet - Type 309S |
/Asset/Stainless-Steel-Plate.jpg 309S-14-48-96 Stainless Steel Sheet - Type 309S |
/Asset/Stainless-Steel-Plate.jpg 309S-14-48-120 Stainless Steel Sheet - Type 309S |
/Asset/Stainless-Steel-Plate.jpg 309S-12-48-96 Stainless Steel Sheet - Type 309S |
|||||
| Material | Type 309S Stainless Steel | |||||||||
| Shapeform | Sheets | |||||||||
| Thickness | 16 gauge | 16 gauge | 14 gauge | 14 gauge | 12 gauge | |||||
| Thickness | 0.060 inches1.524 mm | 0.060 inches1.524 mm | 0.075 inches1.905 mm | 0.075 inches1.905 mm | 0.105 inches2.667 mm | |||||
| Size | 48 x 96 | 48 x 120 | 48 x 96 | 48 x 120 | 48 x 96 | |||||
| Width | 48 | |||||||||
| Length | 96 | 120 | 96 | 120 | 96 | |||||
| Sheet Weight per Unit Area | 2.520 lbs/ft²12.30264 kg/m² | 2.520 lbs/ft²12.30264 kg/m² | 3.150 lbs/ft²15.3783 kg/m² | 3.150 lbs/ft²15.3783 kg/m² | 4.411 lbs/ft²21.534502 kg/m² | |||||
| Estimated Weight per Sheet | 80.65 lbs36.53445 kg | 100.81 lbs45.66693 kg | 100.81 lbs45.66693 kg | 126.01 lbs57.08253 kg | 141.14 lbs63.93642 kg | |||||
| Finish | No. 2B | |||||||||
| Condition | Cold Rolled Annealed | |||||||||
| Nominal Composition | 0.08% Max. Carbon 1.00% Max. Silicon 12.00 to 15.00% Nickel 2.00% Max. Manganese 22.00 to 24.00% Chrominum | |||||||||
| ASTM Specification | ASTM A240 ASTM A480 ASTM SA-240 UNS S30908 | |||||||||
| Steel Alloy Group | Austenitic | |||||||||
| Harden By | Cold Work | |||||||||
| Corrosion Resistance | High | |||||||||
| Hardness | Low to Med. | |||||||||
| Strength | Low to Med. | |||||||||
| Ductility | High | |||||||||
| Toughness | Low | |||||||||
| Elec. Conductance | Low | |||||||||
| Thermal Conductance | Low | |||||||||
| Thermal Expansion | High | |||||||||
| Heat Resistance (Scaling Strength) | High/High | |||||||||
| Yield Strength | 47000 lbs/in² | |||||||||
| Tensile Strength | 88000 lbs/in² | |||||||||
| Elongation percent in 2 inches | 46 % | |||||||||
| Hardness (Rockwell B) | 85 | |||||||||
| Density | 0.29 lbs/in³ | |||||||||
| Modulus of Elasticity in Tension | 29.0 x 106 lbs/in² | |||||||||
| Specific Heat (32 to 212°F) | 0.12 BTU/ºF/lbs | |||||||||
| Thermal Conductivity at 212°F | 9.0 BTU/hr.ft²/ft/ºF | |||||||||
| Thermal Conductivity at 932°F | 10.8 BTU/hr.ft²/ft/ºF | |||||||||
| Mean Coefficient of Thermal Expansion per °F (32 to 212°F) | 8.3 x 10-6 ºF | |||||||||
| Mean Coefficient of Thermal Expansion per °F (32 to 600°F) | 9.3 x 10-6 ºF | |||||||||
| Mean Coefficient of Thermal Expansion per °F (32 to 1000°F) | 9.6 x 10-6 ºF | |||||||||
| Mean Coefficient of Thermal Expansion per °F (32 to 1200°F) | 10.0 x 10-6 ºF | |||||||||
| Melting Point Range | 2500 to 2550 ºF | |||||||||
| Electrical Resistivity | 78 µΩ.cm | |||||||||
| Max. Operating Temp. (Continuous Service) | 2000 ºF | |||||||||
| Max. Operating Temp. (Intermittent Service) | 1800 ºF | |||||||||
| Welding Properties | Good-Tough Welds | |||||||||
| Drawing and Stamping | Good | |||||||||
| Hot Working - Initial Forging | 2050 to 2250 ºF | |||||||||
| Annealing Temp. | 1850 to 2050 ºF | |||||||||
| Stress Relieving Temp. | 400 to 750 ºF | |||||||||
| Applications |
|
|||||||||
|
|
||||||||||
