Equal Legs Angle - Type 316
Stainless Steel Angle and Tubes
Hot Rolled, Annealed and Pickled
20' Random Lengths A.S.T.M. A276
Most sizes also available in low carbon grade (304L, 316L)
20' Random Lengths A.S.T.M. A276
Most sizes also available in low carbon grade (304L, 316L)
Unit of Measure
Items |
/Asset/406.gif 316-750-750-125 Equal Legs Angle - Type 316 |
/Asset/406.gif 316-1000-1000-125 Equal Legs Angle - Type 316 |
/Asset/406.gif 316-1000-1000-1875 Equal Legs Angle - Type 316 |
/Asset/406.gif 316-1000-1000-250 Equal Legs Angle - Type 316 |
/Asset/406.gif 316-1250-1250-125 Equal Legs Angle - Type 316 |
|||||
Material | N/A Type 316 Stainless Steel | |||||||||
Shapeform | N/A Angle | |||||||||
Size | N/A 3/4 x 3/4 x 1/8 inches | N/A 1 x 1 x 1/8 inches | N/A 1 x 1 x 3/16 inches | N/A 1 x 1 x 1/4 inches | N/A 1 1/4 x 1 1/4 x 1/8 inches | |||||
Working Decimal Equivalent | N/A 0.750 x 0.750 x 0.125 inches19.05 x 19.05 x 3.175 mm | N/A 1.000 x 1.000 x 0.125 inches25.4 x 25.4 x 3.175 mm | N/A 1.000 x 1.000 x 0.1875 inches25.4 x 25.4 x 4.7625 mm | N/A 1.000 x 1.000 x 0.250 inches25.4 x 25.4 x 6.35 mm | N/A 1.250 x 1.250 x 0.125 inches31.75 x 31.75 x 3.175 mm | |||||
Height | N/A 3/4 inches | N/A 1 inches | N/A 1 inches | N/A 1 inches | N/A 1 1/4 inches | |||||
Width | N/A 3/4 inches | N/A 1 inches | N/A 1 inches | N/A 1 inches | N/A 1 1/4 inches | |||||
Length | N/A 1/8 inches | N/A 1/8 inches | N/A 3/16 inches | N/A 1/4 inches | N/A 1/8 inches | |||||
Weight | N/A 0.5845 lbs/ft0.869736 kg/m | N/A 0.7971 lbs/ft1.1860848 kg/m | N/A 1.1557 lbs/ft1.7196816 kg/m | N/A 1.4879 lbs/ft2.2139952 kg/m | N/A 1.0096 lbs/ft1.5022848 kg/m | |||||
Weight per 20' Length | N/A 11.690 lbs5.29557 kg | N/A 15.941 lbs7.221273 kg | N/A 23.115 lbs10.471095 kg | N/A 29.757 lbs13.479921 kg | N/A 20.192 lbs9.146976 kg | |||||
Finish | N/A No. 2B | |||||||||
Condition | N/A Hot Rolled Annealed Pickled | |||||||||
Nominal Composition | N/A 0 to 0.25% Carbon 1.00% Max. Silicon 2.00% Max. Manganese 6 to 36% Nickel 7 to 30% Chrome | |||||||||
ASTM Specification | N/A ASTM A276 UNS S31600 | |||||||||
Random Length | N/A 10 to 14 | |||||||||
Steel Alloy Group |
N/A Austenitic | |||||||||
Magnetic Properties | N/A Non-Magnetic | |||||||||
Harden By | N/A Cold Work | |||||||||
Corrosion Resistance | N/A High | |||||||||
Hardness | N/A Low to Med. | |||||||||
Strength | N/A Low to Med. | |||||||||
Ductility | N/A High | |||||||||
Toughness | N/A High | |||||||||
Elec. Conductance | N/A Low | |||||||||
Thermal Conductance | N/A Low | |||||||||
Thermal Expansion | N/A High | |||||||||
Heat Resistance (Scaling Strength) | N/A High/High | |||||||||
Yield Strength | N/A 45000 lbs/in² | |||||||||
Tensile Strength | N/A 18200 lbs/in² | |||||||||
Elongation percent in 2 inches | N/A 50 % | |||||||||
Hardness (Rockwell B) | N/A 83 | |||||||||
Creep Strength Load for 10000 Hr. with 1% Elongation at 1000°F | N/A 25000 lbs/in² | |||||||||
Creep Strength Load for 10000 Hr. with 1% Elongation at 1100°F | N/A 18200 lbs/in² | |||||||||
Creep Strength Load for 10000 Hr. with 1% Elongation at 1200°F | N/A 12700 lbs/in² | |||||||||
Creep Strength Load for 10000 Hr. with 1% Elongation at 1300°F | N/A 7900 lbs/in² | |||||||||
Density | N/A 0.29 lbs/in³ | |||||||||
Modulus of Elasticity in Tension | N/A 29.0 x 106 lbs/in² | |||||||||
Specific Heat (32 to 212°F) | N/A 0.12 BTU/ºF/lbs | |||||||||
Thermal Conductivity at 212°F | N/A 9.4 BTU/hr.ft²/ft/ºF | |||||||||
Thermal Conductivity at 932°F | N/A 12.4 BTU/hr.ft²/ft/ºF | |||||||||
Mean Coefficient of Thermal Expansion per °F (32 to 212°F) | N/A 8.8 x 10-6 ºF | |||||||||
Mean Coefficient of Thermal Expansion per °F (32 to 600°F) | N/A 9.0 x 10-6 ºF | |||||||||
Mean Coefficient of Thermal Expansion per °F (32 to 1000°F) | N/A 9.7 x 10-6 ºF | |||||||||
Mean Coefficient of Thermal Expansion per °F (32 to 1200°F) | N/A 10.3 x 10-6 ºF | |||||||||
Melting Point Range | N/A 2500 to 2550 ºF | |||||||||
Electrical Resistivity | N/A 74 µΩ.cm | |||||||||
Max. Operating Temp. (Continuous Service) | N/A 1650 ºF | |||||||||
Max. Operating Temp. (Intermittent Service) | N/A 1500 ºF | |||||||||
Welding Properties | N/A Very Good-Tough Welds | |||||||||
Drawing and Stamping | N/A Good | |||||||||
Hot Working - Initial Forging | N/A 2100 to 2300 ºF | |||||||||
Annealing Temp. | N/A 1850 to 2050 ºF | |||||||||
Stress Relieving Temp. | N/A 400 to 750 ºF | |||||||||
Applications |
N/A
|
|||||||||
|