Aluminum Sheet - Series 2024-0 Alclad

2024 is one of the best known of the high strength aluminum alloys. With its high strength and excellent fatigue resistance, it is used to advantage on structures and parts where good strength-to-weight ratio is desired. It is readily machined to a high finish. It is readily formed in the annealed condition and may be subsequently heat treated. Arc or gas welding is generally not recommended, although this alloy may be spot, seam or flash welded. Since corrosion resistance is relatively low, 2024 is commonly used with an anodized finish or in clad form ("Alclad") with a thin surface layer of high purity aluminum. Applications: aircraft structural components, aircraft fittings, hardware, truck wheels and parts for the transportation industry.
Alclad sheet must be masked before shearing to protect surface finish.

2024-0 Alclad
Heat Treatable Interleaved and Stenciled
AMS-QQ-A-250/5 AMS 4040

Request Information

Unit of Measure

Items	2024-0A-032-144 Aluminum Sheet - Series 2024-0 Alclad	2024-0A-040-144 Aluminum Sheet - Series 2024-0 Alclad	2024-0A-050-144 Aluminum Sheet - Series 2024-0 Alclad	2024-0A-063-144 Aluminum Sheet - Series 2024-0 Alclad	2024-0A-071-144 Aluminum Sheet - Series 2024-0 Alclad
Material	N/A Aluminum
Shapeform	N/A Sheets
Series	N/A 2024-0 Alclad
Grade	N/A 2024
Preparation	N/A Interleaved and Stenciled
Temper	N/A Soft Alclad
Condition	N/A Heat Treatable
Thickness	N/A 0.032 inches0.8128 mm	N/A 0.040 inches1.016 mm	N/A 0.050 inches1.27 mm	N/A 0.063 inches1.6002 mm	N/A 0.0710 inches1.8034 mm
Size	N/A 48 x 144
Length	N/A 144
Sheet Weight per Unit Area	N/A 0.461 lbs/ft²2.250602 kg/m²	N/A 0.576 lbs/ft²2.812032 kg/m²	N/A 0.720 lbs/ft²3.51504 kg/m²	N/A 0.907 lbs/ft²4.427974 kg/m²	N/A 1.022 lbs/ft²4.989404 kg/m²
Weight per Sheet	N/A 22.12 lbs10.033 kg	N/A 27.65 lbs12.542 kg	N/A 34.56 lbs15.676 kg	N/A 43.55 lbs19.754 kg	N/A 49.08 lbs22.262 kg
ASTM Specification	N/A AMS 4040 AMS-QQ-A-250/5
Ultimate Strength	N/A 26 ksi
Yield Strength	N/A 11 ksi
Elongation percent in 2 inches	N/A 20
Ultimate Shearing Strength	N/A 18 ksi
Modulus of Elasticity¹	N/A 10.6 x 10⁶ ksi
Mechinability	N/A D
Brazeability²	N/A D
Gas Weldability³	N/A D
Arc Weldability⁴	N/A D
Resistance Spot and Seam Weldability⁵	N/A D
Applications	N/A Truck wheels, screw machine products, aircraft structures
Density	N/A 0.100 lbs/in³
Specific Gravity	N/A 2.78
¹ Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ² Ratings A through D for Weldability and Brazeability are relative ratings. ³ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁴ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁵ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.

Products Catalog