6262-T9
Screw Machine Stock
AMS-QQ-A-225/10 UNS A96262
Request Information
Unit of Measure
Items
506451146-497007210-aluminum-round-bar

Aluminum Rounds - Series 6262-T9
506451146-497007210-aluminum-round-bar

Aluminum Rounds - Series 6262-T9
506451146-497007210-aluminum-round-bar

Aluminum Rounds - Series 6262-T9
506451146-497007210-aluminum-round-bar

Aluminum Rounds - Series 6262-T9
506451146-497007210-aluminum-round-bar

Aluminum Rounds - Series 6262-T9
Material N/A Aluminum
Shapeform N/A Round
Series N/A 6262-T9
Grade N/A 6262
Temper N/A T9
Diameter N/A 1/4 inches N/A 5/16 inches N/A 3/8 inches N/A 1/2 inches N/A 9/16 inches
Diameter N/A 0.25 inches6.35 mm N/A 0.3125 inches7.9375 mm N/A 0.375 inches9.525 mm N/A 0.5 inches12.7 mm N/A 0.5625 inches14.2875 mm
Estimated Weight N/A 0.0577 lbs/ft0.0858670628 kg/m N/A 0.0902 lbs/ft0.1342323928 kg/m N/A 0.1299 lbs/ft0.1933125036 kg/m N/A 0.2309 lbs/ft0.3436170676 kg/m N/A 0.2922 lbs/ft0.4348415208 kg/m
Estimated Weight per 12' Bar N/A 0.693 lbs0.3143395332 kg N/A 1.082 lbs0.4907869768 kg N/A 1.559 lbs0.7071505516 kg N/A 2.771 lbs1.2569045404 kg N/A 3.507 lbs1.5907485468 kg
ASTM Specification N/A AMS-QQ-A-225/10 UNS A96262
Ultimate Strength N/A 58 ksi
Yield Strength N/A 55 ksi
Elongation percent in 2 inches N/A 10
Hardness Brinnel Number
N/A 120
Ultimate Shearing Strength N/A 35 ksi
Fatigue Endurance Limit1 N/A 13 ksi
Modulus of Elasticity2 N/A 10.0 x 104 ksi
Resistance to Corrosion - General3 N/A B
Stress Corrosion Cracking4 N/A A
Workability (Cold)5 N/A D
Mechinability N/A B
Brazeability6 N/A B
Gas Weldability7 N/A B
Arc Weldability8 N/A B
Resistance Spot and Seam Weldability9 N/A A
Applications N/A Screw machine products
Density N/A 0.098 lbs/in³
Specific Gravity N/A 2.72
  • 1 Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen.
  • 2 Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus.
  • 3 Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces.
  • 4 Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test.
  • 5 Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit.
  • 6 Ratings A through D for Weldability and Brazeability are relative ratings.
  • 7 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 8 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
  • 9 A = Generally weldable by all commercial procedures and methods.
    B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance.
    C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.