Aluminum Architectural Angles

6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.

6063-T52
Stock Lengths 16'
(Sharp inside and Outside Corners)
AMS-QQ-A-200/9 ASTM B221 UNS A96063

Request Information Search by Specification

Unit of Measure

Items	6063-T52-500-500-0625 Aluminum Architectural Angles - Series 6063-T52	6063-T52-500-500-125 Aluminum Architectural Angles - Series 6063-T52	6063-T52-625-625-125 Aluminum Architectural Angles - Series 6063-T52	6063-T52-750-750-0938 Aluminum Architectural Angles - Series 6063-T52	6063-T52-7511-750-0625 Aluminum Architectural Angles - Series 6063-T52
Material	N/A Aluminum
Shapeform	N/A Architectural Angles
Series	N/A 6063-T52
Grade	N/A 6063
Temper	N/A T52
Size	N/A 1/2 x 1/2 x 1/16 inches	N/A 1/2 x 1/2 x 1/8 inches	N/A 5/8 x 5/8 x 1/8 inches	N/A 3/4 x 3/8 x 3/32 inches	N/A 3/4 x 3/4 x 1/16 inches
Working Decimal Equivalent	N/A 0.500 x 0.500 x 0.0625 inches12.7 x 12.7 x 1.5875 mm	N/A 0.500 x 0.500 x 0.125 inches12.7 x 12.7 x 3.175 mm	N/A 0.625 x 0.625 x 0.125 inches15.875 x 15.875 x 3.175 mm	N/A 0.750 x 0.750 x 0.0938 inches19.05 x 19.05 x 2.38252 mm	N/A 0.750 x 0.750 x 0.0625 inches19.05 x 19.05 x 1.5875 mm
Dimension A	N/A 1/2 inches	N/A 1/2 inches	N/A 5/8 inches	N/A 3/4 inches	N/A 3/4 inches
Dimension B	N/A 1/2 inches	N/A 1/2 inches	N/A 5/8 inches	N/A 3/8 inches	N/A 3/4 inches
Thickness	N/A 1/16 inches	N/A 1/8 inches	N/A 1/8 inches	N/A 3/32 inches	N/A 1/16 inches
Estimated Weight	N/A 0.068 lbs/ft0.1011976 kg/m	N/A 0.129 lbs/ft0.1919778 kg/m	N/A 0.165 lbs/ft0.245553 kg/m	N/A 0.1140 lbs/ft0.1696548 kg/m	N/A 0.105 lbs/ft0.156261 kg/m
Estimated Weight per 25' Bar	N/A 1.088 lbs0.4935168 kg	N/A 2.064 lbs0.9362304 kg	N/A 2.640 lbs1.197504 kg	N/A 1.824 lbs0.8273664 kg	N/A 1.680 lbs0.762048 kg
ASTM Specification	N/A AMS-QQ-A-200/9 ASTM B221 UNS A96063
Stock Length	N/A 16 ft
Ultimate Strength	N/A 27 ksi
Yield Strength	N/A 21 ksi
Elongation percent in 2 inches	N/A 12
Hardness Brinnel Number	N/A 60
Ultimate Shearing Strength	N/A 17 ksi
Fatigue Endurance Limit¹	N/A 10 ksi
Modulus of Elasticity²	N/A 10.0 x 10³ ksi
Resistance to Corrosion - General³	N/A A
Stress Corrosion Cracking⁴	N/A A
Workability (Cold)⁵	N/A B
Mechinability	N/A C
Brazeability⁶	N/A A
Gas Weldability⁷	N/A A
Arc Weldability⁸	N/A A
Resistance Spot and Seam Weldability⁹	N/A A
Applications	N/A Pipe railing, furniture, architectural extrusions
Density	N/A 0.097 lbs/in³
Specific Gravity	N/A 2.70
¹ Based on 500,000.000 cycles of completely reversed stress using the R. R. Moore-type of machine and specimen. ² Average of tension and compression moduli. Compression modulus is about 2 percent greater than tension modulus. ³ Ratings A through E are relative ratings in decreasing order of merit, based on exposures to sodium chloride solution by intermittent spraying or immersion. Alloys with A and B ratings can be used in industrial and seacoast atmospheres without protection. Alloys with C, D and E ratings generally should be protected at least on faying surfaces. ⁴ Stress-corrosion cracking ratings are based on service experience and on laboratory tests of specimens exposed to the 3.5% sodium chloride alternate immersion test. ⁵ Ratings A through D for Workability (cold), and A through E for Machinability, are relative ratings in decreasing order of merit. ⁶ Ratings A through D for Weldability and Brazeability are relative ratings. ⁷ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁸ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties. ⁹ A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.

Products Catalog