Low Carbon
Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)

Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 A.S.T.M. A266
A.S.T.M. A262 Prac E ASME SA-240 AMS 5511

Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E

Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A240/A480 ASME SA-240
A.S.T.M. A262 Prac E

Cold Rolled, Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Non-Magnetic (May be Slightly magnetic when cold worked)
Paper Interleaved or Vinyl Masked:
22 Gauge and Heavier
A.S.T.M. A480/A240 ASME SA-240
A.S.T.M. A262 Prac E

Cold Rolled, Annealed No. 2D Finish
Magnetic
Paper Interleaved
A.S.T.M. A240/A480
ASME SA-240

Bright Annealed No. 2BA Finish
Cold-Rolled Annealed No. 2B Finish
Can also be furnished:
No. 3 Finish - Polished One or Two Sides
No. 4 Finish - Polished One or Two Sides
Rolled-on finish available on application.
Magnetic
Paper Interleaved or Vinyl Masked
A.S.T.M. A240/A480 ASME SA-240

• Austenitic (Chrome Nickel)
• Good Cold Working
• Good Elongation in Full Hard Condition
• Good Fatigue Life
• High Strength to Weight Ratio
• Work Hardens Readily - so is in demand in harder tempers
• Not Heat-treatable for Hardening Purposes
• Non-magnetic in Annealed Condition
• Slightly Magnetic in Work-hardened Condition
• Good Heat and Corrosion Resistance
• Welds Easily
• Solution Annealed by Cooling Rapidly from 2000°F in Air or Water.

This soft annealed stainless steel is used for thru-wall flashings, coping, parapets, sills, headers and other situations where a moisture barrier is needed. Its ease of forming and soldering make it ideal for these applications.

2D Mattie Finish Flashing Material