• Metal & Alloy Sheet & Coils

    Low Carbon
    Cold Rolled, Annealed No. 2B Finish

    Can also be furnished:
    No. 3 Finish - Polished One or Two Sides
    No. 4 Finish - Polished One or Two Sides

    Non-Magnetic (May be Slightly magnetic when cold worked)

    Paper Interleaved or Vinyl Masked:
    22 Gauge and Heavier
    A.S.T.M. A240/A480 A.S.T.M. A266
    A.S.T.M. A262 Prac E ASME SA-240 AMS 5511

  • Metal & Alloy Sheet & Coils

    Cold Rolled, Annealed No. 2B Finish
    Can also be furnished:
    No. 3 Finish - Polished One or Two Sides
    No. 4 Finish - Polished One or Two Sides
    Non-Magnetic (May be Slightly magnetic when cold worked)
    Paper Interleaved or Vinyl Masked:
    22 Gauge and Heavier
    A.S.T.M. A240/A480 ASME SA-240
    A.S.T.M. A262 Prac E

  • Metal & Alloy Sheet & Coils

    Cold Rolled, Annealed No. 2B Finish
    Can also be furnished:
    No. 3 Finish - Polished One or Two Sides
    No. 4 Finish - Polished One or Two Sides
    Non-Magnetic (May be Slightly magnetic when cold worked)
    Paper Interleaved or Vinyl Masked:
    22 Gauge and Heavier
    A.S.T.M. A240/A480 ASME SA-240
    A.S.T.M. A262 Prac E

  • Metal & Alloy Sheet & Coils

    Cold Rolled, Annealed No. 2B Finish
    Can also be furnished:
    No. 3 Finish - Polished One or Two Sides
    No. 4 Finish - Polished One or Two Sides
    Non-Magnetic (May be Slightly magnetic when cold worked)
    Paper Interleaved or Vinyl Masked:
    22 Gauge and Heavier
    A.S.T.M. A480/A240 ASME SA-240
    A.S.T.M. A262 Prac E

  • Metal & Alloy Sheet & Coils

    Cold Rolled, Annealed No. 2D Finish
    Magnetic
    Paper Interleaved

    A.S.T.M. A240/A480
    ASME SA-240

  • Metal & Alloy Sheet & Coils

    Bright Annealed No. 2BA Finish
    Cold-Rolled Annealed No. 2B Finish
    Can also be furnished:
    No. 3 Finish - Polished One or Two Sides
    No. 4 Finish - Polished One or Two Sides
    Rolled-on finish available on application.

    Magnetic
    Paper Interleaved or Vinyl Masked
    A.S.T.M. A240/A480 ASME SA-240

  • Image

    • Austenitic (Chrome Nickel)
    • Good Cold Working
    • Good Elongation in Full Hard Condition
    • Good Fatigue Life
    • High Strength to Weight Ratio
    • Work Hardens Readily - so is in demand in harder tempers
    • Not Heat-treatable for Hardening Purposes
    • Non-magnetic in Annealed Condition
    • Slightly Magnetic in Work-hardened Condition
    • Good Heat and Corrosion Resistance
    • Welds Easily
    • Solution Annealed by Cooling Rapidly from 2000°F in Air or Water.

  • Metal & Alloy Sheet & Coils

    This soft annealed stainless steel is used for thru-wall flashings, coping, parapets, sills, headers and other situations where a moisture barrier is needed. Its ease of forming and soldering make it ideal for these applications.

    2D Mattie Finish Flashing Material