|
Invar®
invar-reg
 Nicrofer 59 Sheet(6) Nicrofer 59 is a nickel-chromium-molybdenum alloy with extra low carbon and silicon content. The alloy has excellent corrosion resistance and high mechanical strength. It is characterized by excellent resistance to pitting and crevice corrosion. Nicrofer 59 is particularly good in applications using sulphuric and hydrochloric acid mixtures. Nicrofer 59 is used in flue gas sesulphurisation (FGD) applications for scrubbers, reheaters, dampers, fans, and agitators; components for sour gas service; digesters in the pulp industry; and chemical processing equipment. sheet.jpg Invar® 36 Plate(10) Invar® 36 is a nickel-iron-chromium alloy with additions of copper and molybdenum. It also contains niobium for stabilization against sensitization and resultant intergranular corrosion. Invar® 36 has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric and nitric acids. Invar 36 is used for tanks, piping, heat exchangers, pumps, valves and other process equipment. Standard product forms are round, flats, pipe, tube, plate, sheet, strip and wire. nickel-plate.jpg Invar® 42 Plate(5) Invar® 42 is a nickel-iron, controlled-expansion alloy containing 42 percent nickel. It has a low and nominally constant coefficient of thermal expansion form room temperature to about 570°F (300°C). Invar® 42 is used for semiconductor lead frames in integrated circuits, bi-metal thermostat strip, thermostat rods, for ceramic-to-metal seals with alumina ceramics, and various glass-to-metal seals such as the core of copper-clad wire for sealing into glass envelopes of electric bulbs, radio valves, television tubes and fluorescent lights. Standard product forms are tube, sheet, strip and wire. nickel-plate.jpg Nicrofer 59 Plate(8) Nicrofer 59 is a nickel-chromium-molybdenum alloy with extra low carbon and silicon content. The alloy has excellent corrosion resistance and high mechanical strength. It is characterized by excellent resistance to pitting and crevice corrosion. Nicrofer 59 is particularly good in applications using sulphuric and hydrochloric acid mixtures. Nicrofer 59 is used in flue gas sesulphurisation (FGD) applications for scrubbers, reheaters, dampers, fans, and agitators; components for sour gas service; digesters in the pulp industry; and chemical processing equipment. nickel-plate.jpg |
