Galvanized is a term long used to describe steel sheets coated with zinc. Usually associated with the hot dipped process but the zinc coating can also be applied by electroplating. Our hot dipped galvanized sheets are produced to conform with ASTM A525. Electrogalvanized conforms to ASTM A591

The producing mills have accomplished many technological advancements in recent years in the manufacture of both hot dipped and electrogalvanized sheets. The end use should determine the type of coated product and surface condition required. Regardless of the coating weight, spangle size, method of manufacture or surface preparation required Following are descriptions of the grades and conditions of galvanized sheets used most often.

Commercial Quality - Low Carbon
26 - 39 of 39 | Results Per Page | View | Unit of Measure
1 2 

Item #

Thickness

Size

Width

Estimated Weight per Sheet

N/A 0.0635 inches1.6129 mm N/A 48 x 96 N/A 48 N/A 85 lbs38.505 kg
N/A 0.0635 inches1.6129 mm N/A 48 x 120 N/A 48 N/A 106.2 lbs48.1086 kg
N/A 0.0635 inches1.6129 mm N/A 60 x 120 N/A 60 N/A 132.8 lbs60.1584 kg
N/A 0.0785 inches1.9939 mm N/A 36 x 96 N/A 36 N/A 78.7 lbs35.6511 kg
N/A 0.0785 inches1.9939 mm N/A 36 x 120 N/A 36 N/A 98.4 lbs44.5752 kg
N/A 0.0785 inches1.9939 mm N/A 48 x 96 N/A 48 N/A 105.0 lbs47.565 kg
N/A 0.0785 inches1.9939 mm N/A 48 x 120 N/A 48 N/A 131.2 lbs59.4336 kg
N/A 0.0785 inches1.9939 mm N/A 60 x 120 N/A 60 N/A 164.1 lbs74.3373 kg
N/A 0.1084 inches2.75336 mm N/A 48 x 96 N/A 48 N/A 145.0 lbs65.685 kg
N/A 0.1084 inches2.75336 mm N/A 48 x 120 N/A 48 N/A 181.2 lbs82.0836 kg
N/A 0.1084 inches2.75336 mm N/A 60 x 120 N/A 60 N/A 226.6 lbs102.6498 kg
N/A 0.1382 inches3.51028 mm N/A 48 x 96 N/A 48 N/A 185.0 lbs83.805 kg
N/A 0.1382 inches3.51028 mm N/A 48 x 120 N/A 48 N/A 231.2 lbs104.7336 kg
N/A 0.1382 inches3.51028 mm N/A 60 x 120 N/A 60 N/A 289.1 lbs130.9623 kg
26 - 39 of 39 | Results Per Page | View | Unit of Measure
1 2