7075 is one of the highest strength aluminum alloys available Its strength-to weight ratio is excellent and it is ideally used for highly stressed parts. It may be formed in the annealed condition and subsequently heat treated. Spot or flash welding can be used, although arc and gas welding are not recommended. It is available in the clad ('Alclad") form to improve the corrosion resistance with the over-all high strength being only moderately affected. Applications: Used where highest strength is needed.

7075-T6 Alclad
Interleaved and Stenciled
AMS-QQ-A-250/13 AMS 4049
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Thickness

Size

Sheet Weight per Unit Area

Weight per Sheet

7075-T6A-032-48-144 N/A 0.032 inches0.8128 mm N/A 48 x 144 N/A 0.465 lbs/ft²2.27013 kg/m² N/A 22.34 lbs10.12002 kg
7075-T6A-040-48-144 N/A 0.040 inches1.016 mm N/A 48 x 144 N/A 0.582 lbs/ft²2.841324 kg/m² N/A 27.92 lbs12.64776 kg
7075-T6A-050-48-144 N/A 0.050 inches1.27 mm N/A 48 x 144 N/A 0.727 lbs/ft²3.549214 kg/m² N/A 34.91 lbs15.81423 kg
7075-T6A-063-48-144 N/A 0.063 inches1.6002 mm N/A 48 x 144 N/A 0.916 lbs/ft²4.471912 kg/m² N/A 43.98 lbs19.92294 kg
7075-T6A-071-48-144 N/A 0.0710 inches1.8034 mm N/A 48 x 144 N/A 1.033 lbs/ft²5.043106 kg/m² N/A 49.57 lbs22.45521 kg
7075-T6A-080-48-144 N/A 0.080 inches2.032 mm N/A 48 x 144 N/A 1.164 lbs/ft²5.682648 kg/m² N/A 55.85 lbs25.30005 kg
7075-T6A-100-48-144 N/A 0.100 inches2.54 mm N/A 48 x 144 N/A 1.454 lbs/ft²7.098428 kg/m² N/A 69.81 lbs31.62393 kg
7075-T6A-125-48-144 N/A 0.125 inches3.1750 mm N/A 48 x 144 N/A 1.818 lbs/ft²8.875476 kg/m² N/A 87.26 lbs39.52878 kg
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1